Security researchers from Midnight Blue have identified six significant vulnerabilities in the Danfoss AK-SM800A refrigeration controllers that could allow remote attackers to take control without needing to log in. Despite the critical nature of these flaws, there is currently no patch available, and the latest firmware version 5.4.0 does not address these issues. Authorities in Belgium, Ireland, and Germany have advised operators to remove the controllers' management interfaces from the internet to prevent potential exploitation. The AK-SM800A controllers, used primarily in managing refrigeration units in stores, have been targeted in recent cyberattacks across Europe, leading to incidents such as unintended defrost cycles and stock damage. While no direct link has been established between these attacks and the newly discovered vulnerabilities, past incidents involving these controllers have raised concerns about their security. The flaws include issues in web request handlers and a gateway that enforces a protective measure known as Strict mode, which appears insufficient to thwart potential attacks. Researchers emphasize the necessity of removing internet exposure for these controllers immediately, as relying solely on firmware updates or protective features like Strict mode is inadequate. The vulnerabilities were discovered during a manual review of the firmware, revealing deep-seated security weaknesses that require urgent attention. Danfoss has previously addressed other vulnerabilities in these controllers, but the persistence of such flaws underscores the need for comprehensive security measures.